您好,欢迎来到济南万顺铸业秒速赛车玩法官方网站! 加入收藏 | 联系万顺

contact
公司新闻当前位置:秒速赛车-新闻资讯 > 公司新闻 >

铸铁护栏施工完成后有哪些要注意的地方?

来源:http://www.kpp647.com添加时间:2019-05-29 18:45:54

铸铁护栏现在的应用很十分的广泛,想要有一个好的使用效果,在安装施工完成后也要注意一些事项,下面就由山东铸铁护栏公司给我们总结一下吧!

Cast iron guardrail is now widely used, in order to have a good use effect, after the completion of installation and construction, we should also pay attention to some matters, the following is summarized by Shandong Cast Iron Guardrail Company for us!

一、施工时的注意事项

I。 Notices in Construction

1. 成品栏杆应符合设计要求,经验收合格后才能进场施工。

1. Finished product railings should meet the design requirements, and only after qualified experience can they enter the construction site.

2. 焊接点有打磨无法处理平整的及接口处有小孔的,需用原子灰密实以防进水后生锈。?

2。 If there are grinding points that cannot be treated smoothly and there are small holes in the joint, it should be compacted with atomic ash to prevent rust after water entry。 ?

3. 连接部位需打磨光滑,刷两道防锈漆,经验收后再做表面一致处理。

3. The joints should be polished smoothly and brushed with two anti-rust paints. After experience, the surfaces should be treated uniformly.

4。 焊接时应满焊,禁止点焊。

4。 Welding should be full and spot welding should not be allowed。

5. 已安装完成的护栏上不得涂抹砂浆及挂放杂物。

5. Mortar and sundries shall not be applied to the installed guardrails.

二、 质量要求

II. Quality Requirements

1. 成品栏杆规格、质量、外形符合设计要求。

1. The specifications, quality and shape of the finished balustrade meet the design requirements.

2. 安装位置、标高正确,满足设计要求。

2. The installation position and elevation are correct to meet the design requirements.

3. 与预埋件连接牢固,无松动、断裂现象。

3。 The connection with the embedded parts is firm, and there is no loosening or fracture。

4. 栏杆高度、栏杆间距符合设计要求。

4. The height and spacing of the railings meet the design requirements.

5。 焊口平滑、焊缝均匀,且需经过防锈处理。

5. Smooth weld, uniform weld, and need anti-rust treatment.

山东铸铁护栏

三、 验收标准

III. Acceptance Standards

1. 栏杆的尺寸、高度、间距、油漆颜色符合设计要求。

1. The size, height, spacing and paint color of the railings meet the design requirements.

2. 栏杆直形部分横平竖直、弯曲部分曲线顺畅。

2. The straight part of the rail is horizontal and vertical, and the curve of the bending part is smooth.

3. 焊口平滑、焊缝均匀,油漆品种、颜色与栏杆一致。

3。 Smooth weld, uniform weld, paint varieties, color and railings consistent。

4. 焊接牢固、无松动。

4。 The welding is firm and free from loosening。

四、 后期养护维修

IV. Later Maintenance and Maintenance

1. 保持栏杆清洁,远离酸碱或易腐蚀物品并经常除尘。

1. Keep the railings clean, away from acid-base or corrosive articles and dust frequently.

2。 栏杆除油一般可采用有机溶液冲洗等方法。

2. Ordinary methods such as washing with organic solution can be used to remove oil from railings.

3. 小面积除锈可用有机油清洗、抹擦。

3. Rust removal in small areas can be cleaned and wiped with organic oil.

4。 栏杆有松动需重新焊接,焊接后需打磨、防锈刷漆处理。

4. If the railings are loose, they need to be re-welded. After welding, they need to be polished and rust-proof painted.

本文由山东铸铁护栏公司提供技术支持,更多的详细精彩内容请点击我们的官方网站:http://www.kpp647.com,我们将会全心全意为您提供满意的服务。

This article is supported by Shandong Iron Fence Company. For more details, please click on our official website: http://www.kpp647.com. We will provide you with satisfactory service wholeheartedly.



  • 版权所有:济南万顺铸业秒速赛车玩法  地址:山东省济南市天桥区金牛建材市场  
  • 电话:  手机号:13475913858 / 18753109752   本网站由提供技术支持  流量统计:
二维码
济南万顺铸业秒速赛车玩法主要为大家提供山东球墨铸铁井盖铸铁护栏落水斗给水管排水管暖气片等产品的批量制作和安装服务,欢迎大家前来选购!
秒速赛车网站 秒速赛车开户 陕西体彩网 秒速赛车网站 江苏11选5 秒速赛车是真的吗 秒速赛车网站 快3正规平台 pk10注册